![background image](http://html2.mh-extra.com/html/hantle/t4000/t4000_operators-manual_3703919027.webp)
Section 3: Programming
Operator Manual
T
4000™
(Rev 1)
© Hantle 2010
3.9
Step 3
Once you have selected Host Phone #1 or Host Phone #2 you will be prompted with
the following screen. Using the numbers on the keypad press the first number of
your phone number.
Step 4
Hantle always recommends using a dedicated, data-quality phone line for all ATM
installations, however if you are using a phone line that is dialing out through a PBX
type system (where you dial a number for an outside line), then you may insert
commas ( , ) to create a pause between digits. Note that commas will not prevent
problems found when voice mail notification occurs on a phone line.
For example if you have to dial a 9 to get an outside line try the following:
9,,18005551212
(the 800 number being an example)
NOTE
: Do not add dashes or invalid characters to the phone number. Entering
anything other than a number or a comma in the host phone number field will cause
the ATM not to dial out. Make sure that Zero’s and ‘O’s’ are identified properly.
END
Содержание T4000
Страница 1: ...Operator Manual Hantle T4000 Hantle Inc...