2.12 Storage System
Showing as following picture, The SAVE/RECALL is the Storage System
Functional Button.
The scope can save 2 groups' reference waveforms, 20 groups' setups and 20
groups' waveforms to the oscilloscope's internal memorizer. There is a USB Host
interface in the front panel of the oscilloscope and you can save setup data,
waveform data, waveform interface image, CSV file to a USB flash drive furthest
at a time. Setup data and waveform data can be recalled to the current oscilloscope
or the other same model oscilloscopes. Picture data and CSV file can't be recalled
to the oscilloscope, but it can be opened on the correlative computer software.
SAVE/RECALL SETUP
Save/recall interface
Show as following pictures
Select operating object
Create new needed folder
Delete present folder
Select operating object
Create new files in
present directorys
Delete present file
Recall stored files or
present settings
Modify the file name
Return to the last menu
In this module,Setting stores to File,Waveform stores to File,storing pictures and
CSV stores to USB flash drive all have this function.Users can modify the name of
the file or the directorys , then store the files.
■ Save Setups to Device： The complete setup is stored in nonvolatile
memory. When you recall the setup, the oscilloscope will be in the mode from which
the setup was saved.
The oscilloscope saves the current setup if you wait three seconds after the last
change before you power off the oscilloscope. The oscilloscope recalls this setup
the next time you apply power.
Storage system control button
70
Digital
S
torage
O
scilloscope
Digital Storage Oscilloscope
71
