Save waveforms to the oscilloscope's internal memorizer,
follow these steps:
Recall the saved waveform from the oscilloscope's internal
memorizer, follow these steps:
●
Press
the SAVE/RECALL button to enter SAVE/RECALL display menu.
●
Press
the Type option button to select waveforms.
●
Press
the Save to option button to select Device.
●
Press
the waveform option button or turn the Universal knob to select No.1.
●
Press
the Recall option button.
■ Save waveforms to USB flash drive
Option
Introduction
Table 2-48 Save waveforms to USB flash drive function menu:
Setup
Type
Waveforms
Menu for the Storage/Recall waveforms.
Save to
File
Save waveforms to USB flash drive.
Save
Accomplish the storage.
Save waveforms to USB flash drive, follow these steps:
●
Input
a sine signal to channel 1, press the AUTO button.
●
Press
the SAVE/RECALL button to enter the SAVE/RECALL display menu.
●
Press
the Type option button to select Waveforms.
●
Insert
USB flash drive to USB host port of the oscilloscope and wait that the
oscilloscope has initialized USB flash drive (about ten seconds).
●
Press
the Save to option button to select File.
●
Press
the Save option button then you'll go into the Save/Recall interface.
●
Create
a file then press the Confirmbutton(about ten seconds, there is a
prompting message that Save data success displaying on the screen),
now waveform data have been saved to USB flash drive.
●
Input
a sine signal to channel 1 and press the Auto button.
●
Press
the SAVE/RECALL button to enter SAVE/RECALL display menu.
●
Press
the Type option button to select waveforms.
●
Press
the Save to option button to select Device.
●
Press
the waveform option button or turn the Universal knob to
select No.1.
●
Turn
the Volts/div knob or S/div knob to adjust the waveform that you
want to need.
●
Press
the Save option button.
Recall saved waveform data form USB flash drive,
follow these steps:
●
Press
the SAVE/RECALL button.
●
Press
the Type button to select Waveforms.
●
Insert
USB flash drive to USB host port of the oscilloscope and wait that the
oscilloscope has initialized USB flash drive (about ten seconds).
●
Press
the Save to option button to select File.
●
Press
the Save option button then go into the Save/Recall interface.
●
Choose
the file you want then press the Load option button (about five
seconds, there is a prompting message that Recall data success
displaying on the screen), now waveform data have been recalled from
USB flash drive.
78
Digital
S
torage
O
scilloscope
Digital Storage Oscilloscope
79