Recall setup data from USB flash drive, follow these steps:
●
Press
the SAVE/RECALL button.
●
Press
the Type button to select Setups.
●
Insert
USB flash drive to USB host port of the oscilloscope and wait that the
oscilloscope has initialized USB flash drive (about ten seconds).
●
Press
the Save to option button to select File.
●
Press
the Save option button then you'll go into the Save/Recall interface .
●
Choose
the file you want then press the Load option button (about five
seconds, there is a prompting message that Read data success), now setup
data have been recalled from USB flash drive.
■ RECALL FACTORY
You can use this option to recall the factory setup.
Table 2-44 Factory function menu:
Option
Setting
Introduction
Type
Factory
To view the Factory setup.
Load
Recall the Factory setup.
SAVE/RECALL WAVEFORM
■ SAVE/RECALL CAPTURED WAVEFORM： The oscilloscope must display any
waveform that you want to save. The oscilloscopes can store twenty captured
waveforms in nonvolatile memory.
■ Save waveforms to Device
Table 2-45 Save waveform to device function menu:
Option
Setting
Introduction
Type
waveforms
Menu for the Storage/Recall waveforms in
the oscilloscope.
Save to
Device
Save waveforms to the oscilloscope's
internal memorizer.
waveform
No.1 to No.20
Press the waveform option button or turn
the Universal knob to select storage position.
Save
Accomplish the storage.
Recall
Recall the storage in the waveform operation
Save setup to USB flash drive, follow these steps：
For example: Save setup that the oscilloscope displays waveform as the form
of Dots to the oscilloscope's internal memorizer.
●
Press
the SAVE/RECALL button to select Setups.
●
Insert
USB flash drive to USB host port of the oscilloscope and wait that the
oscilloscope has initialized USB flash drive (about ten seconds).
●
Press
the Save to option button to select file.
●
Press
the Save option button then you'll go into the Save/Recall interface.
●
Press
the New folder button to creat a new folder
●
Press
the Del folder option button to delete a folder
●
Press
the Modify option button to modify a folder.
●
Press
the New file option button to creat a new file
●
Press
the Del file option button to delete a file
●
Press
the next page option button and press the Rename option button
to modify the name of the file or the folder.
●
Press
the Confirmoption button and you save the set to the USB drive.
74
Digital
S
torage
O
scilloscope
Digital Storage Oscilloscope
75
