2.11.3 Auto Measurement
MEASURE is Automatic measure function button.
When you take automatic measurements, the oscilloscope does all the calculating
for you. Because the measurements use the waveform record points, they are
more accurate than the graticule or cursor measurements.
Option
Introduction
Table 2-36 Auto measure function menu 1:
Voltage
Press this button to enter the Voltage measure menu.
Time
Press this button to enter the Time measure menu.
Delay
Press this button to enter the Delay measure menu.
All Mea
Press this button to enter the All Measurement menu.
Return
Press this option button to return the home page of the
auto measure menu.
Table 2-37 Auto measure function 2-Voltage measure menu:
Option
Setting
Introduction
Source
CH1、CH2、MATH
REFA、REFB
Select input signal source for
Voltage measure.
Type
Vmax, Vmin, Vpp, Vamp,
Vtop, Vbase, Cycle Mean,
Mean, Cycle Vrms, Vrms,
ROVShoot, FOVShoot,
RPREShoot, FPREShoot
Display the corresponding icon and
measure value of your selected Voltage
measure parameter.
Return
Return to the first page of auto
measurement menu.
Press the Type button or turn the
Universal knob to select Voltage
measure parameter.
Auto Measurement button
Option
Setting
Introduction
Table 2-38 Auto measure function3-Time measure menu:
Source
CH1、CH2、MATH、
REFA、REFB
Select input signal source for
Time measure.
Type
Rise Time、Fall Time、
Freq、Period、BWidth、
+Width、-Width、
+Duty、-Duty
Press the Type button or turn the
Universal knob to select Time
measure parameter.
Display the corresponding icon and
measure value of your selected time
measure parameter.
Return
Return to the first page of auto
measurement menu.
64
Digital
S
torage
O
scilloscope
Digital Storage Oscilloscope
65
Press the 'MEASURE' for the Automatic Test.
There are three auto measurement types: Voltage Measure, Time Measure and
Delay Measure. There are thirty two measure parameters in all and display five
parameters on the right of screen at one time
