Hanseatic WQP12-T7735E, Руководство пользователя

Страница: 68 / 80

Page EN-26 Installation, connection and commissioning
Installation
NOTICE
Risk of damage!
Selecting the wrong screws can dam-
age the worktop.
■
Use the screws supplied or screws of
the same length.
Requirements:
– Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
– Maintain sufficient distance from the walls
and adjacent appliances. The measure-
ments of the recess must at least corre-
spond to the details in the diagram above.
1. Switch off the fuse.
2. Remove cardboard, polystyrene and ad-
hesive strips from the inside of the dish-
washer, if you have not already done so.
(c)
3. Affix the enclosed condensation-protec-
tive film (c) to the bottom of the work sur-
face. In this way, you will avoid damage to
the work surface as a result of hot steam
which may be emitted from the dishwash-
er if the dishwasher door is left open.
Inlet/outlet area
and electrical con-
nection.
90°
600 mm
820 mm
100 mm
580 mm
80 mm
90°
Recess dimensions