Hanseatic WQP12-T7735E, Руководство пользователя

Страница: 62 / 80

Page EN-20 Dishwasher operation
Unloading the dishwasher
CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
■
Keep a suffi cient distance to the door
and do not hold your body or upper
body directly above the opened door.
■
Make sure that children do not open
the door if the programme has only
fi nished a short time ago.
■
Only open the door slightly to allow
the steam to escape more easily.
■
Allow the dishes to cool before un-
loading the dishwasher.
Trip hazard!
An open dishwasher door can quickly
become a trip hazard.
■
Close the door after every use.
■
Only leave the door slightly open to
cool down.
NOTICE
Risk of damage!
■
Make sure that children and pets do
not stand on the open door.
Once the programme has ended and the
dishes have cooled off, you can remove the
dishes.
1. When unloading the dishwasher, start
with the lower rack and then unload the
upper rack. This will prevent water drip-
ping onto the lower layer of dishes from
the top layer of dishes.
2. Leave the dishwasher door slightly open
so that the inside of the dishwasher can
also cool off and dry out.
Changing the dishwasher
programme
CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
■
Keep a suffi cient distance to the door
and do not hold your body or upper
body directly above the opened door.
■
Keep children and pets away from the
appliance when opening the door.
■
Make sure that children do not open
the door during operation.
(11) (13)
(6)
You can interrupt an active dishwasher pro-
gramme at any point and start a new one.
However, do not forget to add extra dish-
washer detergent if the programme has al-
ready been running for a longer period and
the cover of the dishwasher detergent com-
partment is already open.
1. Press the button (11) in order to inter-
rupt the dishwashing programme.
The remaining duration display (6) will re-
main permanently illuminated.
2. If required, add extra dishwasher deter-
gent.
3. Only press on the P (13) button until the
programme symbols (1) go out and the
remaining duration display (6) is set to
“zero”.
4. Select the new programme with the
P (13) button.