Hanseatic WQP12-T7735E, Руководство пользователя

Страница: 61 / 80

Page EN-19 Dishwasher operation
This option produces an improved dry-
ing result.
This option is not available with the pro-
grammes
, and .
• To switch the option
– on, press the button (16).
The symbol (8) will appear on the dis-
play.
– off, press the button again. The symbol
will disappear in the display.
Selecting the spraying arm(s)
(15) (9)
If only one of the two dish racks is loaded, you
should deactivate the spraying arm which you
do not require.
– Upper dish rack loaded:
– Lower dish rack loaded:
• Press the button (15) as often as
required until only the symbol for the de-
sired spraying arm is illuminated.
Delayed start
(12)
(6)
The wash cycle normally starts as
soon as you press the button “Start/
Pause”
(11).
If you want the cycle to begin later, you can
specify this. The start time can be delayed by
between 1 and 24 hours.
• Press the plus or minus button (12)
as often as required until the display (10)
shows the desired start-delay (
H:00
,
H:01
to H:24 ).
Starting the dishwashing
programme
(11)
(6)
1. Start the programme with the button (11).
If you
– have not set up a delayed start, the pro-
gramme cycle will start after a few sec-
onds.
– have set up a delayed start, the display
will initially still show the start-delay du-
ration (6); the dots between
H and the
number of hours will flash. The pro-
gramme will start as usual after the delay
period has finished.
During the programme the display will
show the time remaining (6); the dots
between hour and minute numbers will
flash.
At the end of the programme duration, an
acoustic signal will sound 8 times and the
display will show
End .
2. Switch the dishwasher off using the but-
ton (18).
3. Turn the tap off.
4. Wait a little while before unloading the
dishwasher.