Page EN-29
Installation, connection and commissioning
(h)
(h)
12. Lay the enclosed drilling template on the
back
of the front panel in such a way
that the drilling template and the front
panel are flush at the top.
13. Transfer the drill holes from the drill tem-
plate to the front panel.
14. Drill the marked hole positions using a
Ø 2 mm drill bit.
15. Remove the protective films from the
other Velcro straps and stick the velcro
straps to the front panel using the drilling
template.
16. Fix the front panel to the dishwasher
door using the Velcro straps (h) hold it
firmly and carefully open the door.
(k)
(k)
17. Remove the 4 screws from the inside of
the door. Screw the front panel in place
at these positions using the 4 enclosed
screws (k).
You have now fitted the front panel.
Adjusting the opening of the
door
You can adjust how easy or diffi cult it
is to open the dishwasher door. This
setting is often required after the front
panel has been mounted. You can
change the spring force of the door by
turning both lower screws.
To adjust the door
– so that it is easier to open, turn the screws
in an anti-clockwise direction.
– so that it is more difficult to access, turn the
screws in a clockwise direction.
Содержание WQP12-T7735E
Страница 42: ...Produktdatenblatt gem VO EU Nr 1059 2010 Seite DE 42...
Страница 56: ...Page EN 14 Loading the dishwasher...
