53
English
O p e r a t i n g / s e r v i c i n g E L 4 0
(EL = electronic version)
Servicing the thermostat
Clean the dirt sieve:
1) Switch current to transformer off and remove
motor cover (1).
2) Shut off hot and cold water supply.
3) Use a screwdriver to loosen the motor from the bracket
(snap lock) and remove (2).
4) Open both lock screws (3) by turning counter-clockwise.
5) Take out and clean the dirt sieve.
6) Remove the white adapter sleeve. Unscrew the control
element and clean the dirt sieve.
7) Refit in reverse order.
8) Refit white adapter sleeve and turn the control element
to the right to stop.
9) Reconnect power supply.
10) Push motor back on again.
11) Refit motor cover.
12) Carry out motor adjustment (see page 47).
1
2
3
Danger of frost or emptying of the entire
plumbing system of water system
– then the shut-off valve must remain
open and the non-return valves/filter
removed.
– Installation unit must be blown out by
using pressurised air.
Servicing body showers
The body showers have the simple cleaning system
“rub-it”
.
Advantage: Lime deposits on the discharge nozzle are easily
removed by rubbing by hand or with a sponge.
From time to time body showers should be moved and
re-greased on the uppermost swivel joint with grease or a
light hand cream.
