handi quilter Pro-Stitcher QM30010-2, Руководство пользователя

Страница: 62 / 139

www.HandiQuilter.com Design Menu | 5.5
Loading the thumbnails may take a few moments, depending on how many designs are stored in
the selected folder and how intricate those designs are. While the thumbnails load, a colored block
with the name of the file type will be visible in place of the actual design thumbnail.
3. Double-tap the name of the desired file or single tap and then press
Open
to load the design. A
prompt to Clear Area appears on-screen. Choose Yes to clear any area you have defined or No to
leave the area as designated.
Designers Showcase
Pro-Stitcher comes with a large library of quilting motifs from digital quilt motif designers.
Select Designers Showcase and then select the designer’s name to see the motifs. Then
choose the design you want to use and select Open . These designs are in a vector file
format, .hqv. If you save the design, either to a new name or overwrite the existing .hqv file,
Pro-Stitcher changes it to an .hqf file format.
To save a design
Pro-Stitcher prompts you to save your work when closing the software or closing a design. However, it is a
good idea to save your work regularly.
• Press Save to save the design in its current state. The design library appears with the name of the
current design loaded.
•
To overwrite the existing design with that name, press Save .
• To save a copy of the design to a new name, enter a new name using the pop-up keyboard and
then press Save .
•
To cancel without saving the design, press Cancel .
To save a group as a design or a project
You can save a group of designs as a design or as a project. If you save a group as a design, Pro-Stitcher
creates a single design. When you load it again in the future, you will not be able to work with the designs
independently.
Designs are organized into
four folders: block designs,
continuous line designs, corner
designs, and triangle designs.
Select a design and
then choose Delete
File to remove it from
your computer.
Choose Refresh to
reload the thumbnails
in the selected folder.
Select a design and
press Open to load it
or press Cancel to exit.
Use these buttons to navigate among
folders on the current drive or to open
folders on a USB drive.