handi quilter Pro-Stitcher QM30010-2, Руководство пользователя

Страница: 110 / 139

www.HandiQuilter.com Settings Menu | 8.5
To turn on automatic bobbin-thread pullups
• Press Pull-Up Auto for Pro-Stitcher to shift the quilting machine to the right a few inches after
pulling up the bobbin thread so you can grab both threads. Press Resume to continue quilting the
design.
NOTE: If Pull-Up Auto is not selected, but Pull-Up On is selected, the quilting machine will take a
stitch at the start point and then disable the motors. This enables you to manually push the quilting
machine aside to pull up the bobbin thread. Press Resume for the machine to move back into
position and resume quilting.
Control the delay following a bobbin-thread pullup
The Pause Delay feature pauses the quilting machine shortly after starting into a design and after each time
a pullup is performed. This enables you to safely trim the thread tails.
• Select Settings, Pause Delay.
To set the Pause Delay
• Select On to turn on Pause Delay or Off to turn off Pause Delay.
You have the option of setting the Pause Delay in seconds (how long of a delay) or inches (how far it
stitches before pausing).
To set Pause Delay in seconds
• Select Seconds and then press the Plus Sign (+) to increase or Minus Sign (–) to decrease the
number of seconds for the pause. Pro-Stitcher will pause the number of seconds indicated so you
can trim thread tails and then resume stitching.
To set Pause Delay in inches
• Select Inches and then press Plus Sign (+) to increase or Minus Sign (–) to decrease the number of
inches Pro-Stitcher stitches before pausing. Press Resume after trimming thread tails to continue
stitching.