Hamworthy STRATTON MK3 Series, Инструкция по установке, наладке и обслуживанию

Страница: 120 / 154

120 / 154
STRATTON MK3 - Installation, Use and Maintenance
00U07428680-C
Line
no.
Programming Access Default value Customer setting
Heating circuit 3
1310 Ambient temperature comfort setpoint CCP U 20 °C
1312 Reduced ambient temperature setpoint CCP U 18 °C
1314 Ambient setpoint temp. frost protection CCP U 10 °C
1316 Maximum comfort setpoint CCP S 35 °C
1320 Heating characteristic slope CCP U 1.5
1321 Heating characteristic offset CCP S 0 °C
1326 Heating characteristic translation CCP S Stop
1330 Summer/Winter switching temperature CCP U 19 °C
1332 Daily heating limit CCP S -3 °C
1340 Maximum start temperature limitation CCP M 8 °C
1341 Maximum start temperature limitation CCP M 80 °C
1342 Room thermostat start temperature CC3 U 65 °C
1350 Ambient temperature influence factor CCP S 20%
1360 Ambient temperature limitation Heating circuit P S 1 °C
1361 Terminal regulator heating limit CCP S
16%
1370 Ambient cons. over-value CCP (accelerated heating) S 3 °C
1380 Rapid reduction heating circuit P S stop
1390 Max. anticipated switch-on time CCP S 00:00
1391 Max. anticipated switch-off time CCP S 00:00
1400 Start of increase ambient temperature setpoint CCP S -5 °C
1401 End of increase ambient temperature setpoint CCP S -15 °C
1420 Overheating protection of CCP to pump S on
1430 Mixing valve setpoint over-value CCP S 3 °C
1432 Servomotor regulation type CCP S 3 points
1433 Servomotor differential CCP S 2 °C
1434 Servomotor travel time CCP S 120 s
1435 Band P (Xp) CCP S
32 °C
1436 Integration time (Tn) CCP S
120 s
1450 Screed drying function CCP M stop
1451 Manual setpoint for drying concrete screeds CCP M 25 °C
1461 Over-temperature reduction CC3 S always
1470 Heating circuit P with buffer tank S no
1472 Heating circuit 3 with Pre-regulator/Supply pump S no
1481 Wert 5938 S 100%
1482 Min. speed of the CCP pump S 100%
1483 Max. speed of the CCP pump S 100%
1500 Operating mode switching heating circuit P S protection mode
Domestic hot water
1610 DHW temperature nominal setpoint U 50 °C
1612 DHW temperature reduced setpoint S 45 °C
1614 DHW temperature nominal max. setpoint S 65 °C
1620 DHW release M 24/24