Hamworthy STRATTON MK3 Series, Инструкция по установке, наладке и обслуживанию

Страница: 11 / 154

2. APPROVALS
2.1. Compliance with UK Directives
- Satisfies the essential requirements of the Electrical Equipment (Safety)
Regulations 2016 and is manufactured in accordance with the UK
designated standards.
- Satisfies the essential requirement of the Electromagnetic Compatibility
Regulations 2016 and is manufactured in accordance with the UK
designated standards.
- Satisfies the essential requirements of the regulation 2016/426 on gas
appliances as bought into UK law and amended and is manufactured in
accordance with the UK designated standards.
- Satisfies the essential requirements of the Directive 92/42/EEC on efficiency
requirements for new hot-water boilers fired with liquid or gaseous fuels
as amended by The Ecodesign for Energy-Related Products and Energy
Information (Amendment) (EU Exit) Regulations 2019 and is manufactured
in accordance with the UK designated standards.
2.2. Regulatory installation conditions for other countries
See earlier reference to Gas Safe etc..
The appliance must be installed and maintained by a qualified professional,
in accordance with the regulations and current regulatory practices in the
country where the boiler is installed.
2.3. Gas category
This boiler has been adjusted in the factory to work with group H (type G20)
natural gas with a supply pressure of 20 mbar .
See chapter 4.4 for how to change the gas, and use a qualified professional.
INFORMATION: Any work on a sealed component will lead to loss of the guarantee.
Models
Gas category
UK IE
40 to 120
II
2H3P
II
2H3P
150
I
2
H
I
2
H
06.02.2023 11 / 154
STRATTON MK3 - Installation, Use and Maintenance