19
Advan ced Fea tures
Hammond XPK-100 Quick Features Guide
Current Parameter
Current Parameter
Current Value
Your Selected Value
Current Parameter
Current Value
Ë
Advanced Feature - E06 Fixed Vel. Value
This Advanced Feature allows you to transmit a fixed Velocity number from 0 through 127 from
the
XPK-
100
to
a
connected
MIDI
device. This is useful if you are transmitting to a sound module or synthesizer
which has specific sounds for different Velocity values. You can select from “1" through “127.” The
default setting is “100.”
TRY THIS:
1.
From PLAY Mode, press the PLAY/EDIT Switch once. The Information Center Display
should alternate between two messages as shown below:
2.
Press the PRESET/EDIT “
” Switch repeatedly until the Information Center Display
alternates between two messages as shown below:
NOTE:
You can also press the PRESET/EDIT “
” Switch to arrive at the same Advanced Feature selection.
3.
Now use the Pedal keys to select the Velocity setting you want.
Using the DEC/INC Pedal keys:
Use the DEC (“A
<
”) Pedal key to decrease the Velocity
setting.
Use
the
INC
(“B”)
Pedal
key
to
increase
the
Velocity
setting.
4.
When
you
have
made
your
selection,
then
press
the
Hi
“C”
Pedal
once. The Information
Center Display will show you the current parameter alternating with your selected value:
5.
To exit the EDIT Mode
and
return
to
PLAY
Mode,
press
the
“Hi
C”
Pedal
again. The XPK-
100 will now play at the Velocity you have selected.
NOTE:
After doing the above, you will notice a small red dot between the first and second characters
of
the
Information
Center
Display. This indicates that your new value has not been saved to a Preset. For information
on how to save your settings to a Preset, see page 34.
6.
To continue editing, instead of pressing the Hi “C” Pedal,
use
the
PRESET/EDIT
Switches
to
select
the
parameter
you
want
to
edit. When you are finished editing, press the “Hi
C” Pedal once to return to PLAY Mode. All of your changes will now take effect.
