12
Advanced Features
Hammond XPK-100 Quick Features Guide
Ë
Advanced Feature - E01 Transpose
This Advanced Feature allows you to transpose the XPK-100 into another key. You can select from “-5"
(down 5 half-steps) through “6” (up 6 half-steps). The default setting is “0.”
NOTE:
The TRANSPOSE LED to the right of the Information Center Display will light whenever
the
XPK-100
is
set
to
play
in
any
octave
other
than
“0.”
You
can
transpose
the
XPK-100
using
two
methods:
1.
Using
the
TRANSPOSE/LOCK
Switch.
2.
Using
EDIT
Mode.
TRY
THIS
-
To
transpose
the
XPK-100
using
the
TRANSPOSE/LOCK
Switch:
1.
From
PLAY
Mode,
press
the
TRANSPOSE/LOCK
Switch
once. The Information Center
Display should look similar to what is shown below:
Notice that the red LED by the word, “TRANSPOSE” is flashing. This indicated that the XPK-100
is ready to be transposed.
2.
Now select the Transposition interval you want by using the Pedal keys. That data chart
below shows how to do this.
TRANSPOSE OPTIONS
Transposition Interval
Action
No Transposition
Press the “Lo C” Pedal
Up 1 half-step
Press the “C
<
” Pedal
Up 2 half-steps
Press the “D” Pedal
Up 3 half-steps
Press the “D
<
” Pedal
Up 4 half-steps
Press the “E” Pedal
Up 5 half-steps
Press the “F” Pedal
Up 6 half-steps
Press the “F
<<
” Pedal
Down 5 half-steps
Press the “G” Pedal
Down 4 half-steps
Press the “G
<<
” Pedal
Down 3 half-steps
Press the “A” Pedal
Down 2 half-steps
Press the “A
<
” Pedal.
Down 1 half-steps
Press the “B” Pedal
NOTE:
Pressing the “Hi C” Pedal will have no effect.
As soon as you press and
release
the
Pedal
of
your
choice,
the
TRANSPOSE
LED
will
stop
flashing
and
glow
continually. This indicates that the XPK-100 is now transposed.
Use the TRANSPOSE/LOCK Switch to turn Transpose “ON” and “OFF.” Only a momentary touch
is required.
