7
Information Center Display
Hammond XPK-100 Quick Features Guide
Current Parameter
Current Value
EDIT Mode
If you touch the PLAY/EDIT Switch once from any of the PLAY screens, the Information Center Display
will alternate between two messages as shown below:
You are now in EDIT Mode.
You can now use the PRESET/EDIT Switches to select from among the different Advanced Features.
Use the “
” Switch to scroll up through the Advanced Feature selections.
Use the “
” Switch to scroll down through the Advanced Feature selections.
The Advanced Features are explained in full starting on page 8.
Ë
ALL RESET
You can insure that the
XPK-100
contains
the
factory-default
settings
for
all
parameters
before
applying
power
to
it.
NOTE:
Doing the following procedure will erase all parameters, settings and registrations,
returning
the
XPK-100
to
the
original
Hammond
factory
default
settings. To ensure that important data is
saved,
save
your
information
to
a
MIDI
Data
recorder
before
doing
this
procedure.
1.
Plug
the
AC
power
supply
that
came
with
your
XPK-100
into
an
AC
outlet.
2.
On
the
XPK-100,
Press
and
Hold
the
two
PRESET/EDIT
Switches
with
two
fingers
of
one
hand.
3.
While
holding
down
the
two
PRESET/EDIT
Switches,
insert
the
plug
from
the
AC
power
supply
into
the
jack
on
the
back
of
the
XPK-100
with
the
other
hand. The Information
Center Display will flash the following for approximately 1 second:
The above is an abbreviation for, “ALL Initialize.”
When the above message stops displaying, the Information Center Display will show the
following:
5.
Release the two PRESET/EDIT Switches. All parameters are now reset.
