Hammond XK-1, Руководство пользователя

Страница: 69 / 108

Setting the Parameters
69
OD/VIB (OverDrive / VIBrato)
In this mode, you can change the setting relating to each Effect for Overdrive and
Vibrato/Chorus.
To locate this mode:
1. Touch the [MENU/EXIT] button to display the MENU, select PAGE C by the [PAGE]
button, and then touch the [1] OD/VIB button.
2. Or, hold down the [O.D. ON] button for a while (OVERDRIVE page), [V1/C1], [V2/C2] or
[CHORUS] button for a while (VIBRATO/CHORUS page).
 OVERDRIVE
1. DRIVE
This is for adjusting the Overdrive Value.
The higher value gets, the more distortion you can get.
This is linked with the [OVERDRIVE] knob on the front panel.
The setting range is 0 to 63.
2. EXPRESSION
This is for varying the amount of Overdrive by changing the
Expression value.
EX
J
OD:
If you operate the Expression pedal, not only the
volume but also the distortion will be changed.
OD
J
EX:
The Expression pedal affects only the volume and not
the distortion value.
OD ONLY:
The Expression pedal affects only the distortion value
and not the volume.
 VIBRATO/CHORUS
3. VIBRATO - RATE
This is for setting the Speed of the Vibrato/Chorus Effect.
The setting range is 6.10 - 7.25 Hz.
4. VIBRATO - TREMOLO
This is for setting the Tremolo (amplitude modulation) of the
Vibrato/Chorus Effect.
The setting range is 0 - 15.
5. VIBRATO - EMPHASIS
This is for setting the Emphasis (boost the high frequency) of
the Chorus Effect (C1/C2/C3).
The setting range is 0 - 9dB.
6. VIBRATO - DEPTH V1
7. VIBRATO - DEPTH V2
8. VIBRATO - DEPTH V3
9. VIBRATO - DEPTH C1
10. VIBRATO - DEPTH C2
11. VIBRATO - DEPTH C3
These are for setting the Depth of the each Vibrato/Chorus
Effect mode.
The setting range is 0 - 15.
NOTE: The parameters in these modes are Preset Parameters
and are recorded to each Combination Preset.
11 10 9
5
8 7 6
3 4
1 2