Hammond XK-1, Руководство пользователя

Страница: 60 / 108

*#1 :-
Owner’s Manual
60
 FOOT SWITCH
15. FOOT-SWITCH - TIP (G)
This is for setting the function for the Foot Switch 1 terminal.
If you are using the Foot Switch with the stereo plug, this sets the function on the tip
side.
OFF:
Does not work.
LESLIE S/F ALT:
LESLIE S/F MOM:
These are for switching SLOW/FAST of the Leslie Effect.
At ALT, it switches at each press and, at MOM, the Leslie effect gets Fast, as
long as you keep pressing the foot switch, and it gets Slow if you release it.
DAMPER UPPER:
DAMPER LOWER:
DAMPER PEDAL:
They sustain the Notes of the UPPER, LOWER and PEDAL Parts, respectively,
as long as you keep depressing the footswitch.
PRESET FWD:
PRESET REV:
They are for switching one Combination Preset to the right (FWD) or the left
(REV).
SPRING:
This is for producing a sound of the old Spring Reverb.
DELAY TIME:
It sets the delay time of the reverb effect (P. 71) along the kicked intervals.
16. FOOT-SWITCH - RING (G)
This is for setting the function on the RING side, if you use the FOOT SWITCH
equipped with the Stereo plug.
DAMPER
The word “Damper” comes from the damper pedal of
the piano.
The piano stops sounding when you release your
finger from the key. This is because of the damper
system. While you hold the damper pedal, the
system does not work and so it keeps sounding even
after you release the key.
SPRING REVERB
The Spring Reverb is a reverb effect to obtain the
reverberation using the spring resilience. It was
easily affected by a shock and it used to give a big
“clang” if it was bumped.
However, this drawback has come to be used as an
effect in the genre of progressive rock. This keyboard
gives the simulated sound.
TIP AND RING
When you look at the plug of the stereo headphones,
there are 3 metal parts. The head portion is called
“Tip” and the middle portion is the “Ring”. And the
part on the cord side is called “Sleeve”.
The ordinary foot-switch has only the Tip and the
Sleeve, but the footswitch with two switches in one
plug or two footswitches using the L/R converting
cable can be connected.
19
1
16
11 10 9
2 3 4 5 6 7
8
15
18
14 13 12
17
10