HALYTECH
Illuminator User Manual
Page 20
Change User and Password
Only authorised personnel may access an Illuminator. To connect to an Illuminator you must
enter a valid user name and password. Failing to enter them, disables all access to the
Illuminator. Similarly, if a valid sequence is entered, but no activity takes place for 10 minutes,
the access is revoked and the user must again log in.
Both the user name and the password can be set. Factory defaults are “
user
” and
“
changeme
” respectively. It is strongly advised that these be changed as soon as possible to
prevent unauthorised access.
In the event that you forget your new user name or password, you will no longer be able to
connect to an Illuminator. Please contact Halytech or an authorised distributor for assistance.
To change the user name and/or password access the “Change Setup” page as described in
“Setting up an Illuminator for the first time” earlier in this section.
Click “User & Password”.
Enter the new user name and password.
You can exit at any time without making changes by clicking the “Cancel” button.
Save the new values by clicking on the “Save” button.
