24
5. Installation (continued)
6.
Attach the tip (sold separately) to the HAKKO FU-6002 included with the HAKKO FU-601.
CAUTION
Allow the tip to cool before replacing it.
When replacing the tip while it is still hot, be sure to use the heat-resistant pad.
1) Slide the spatter prevention cover forward.
2) Loosen the tip holding screw (M3 × 10).
3) Insert the tip.
4) Tighten the tip holding screw.
5) Cover with the spatter prevention cover.
CAUTION
• Check that there are no gaps between the tip and the spatter prevention cover.
• When attaching a new tip, it is necessary to perform tip position adjustment.
(See p. 25.)
When replacing the tip, do not touch this screw.
HAKKO FU-6002
1)
3)
4)
5)
2)
