HAI OmniLT, Руководство пользователя

Страница: 15 / 20

Page 15
For the 8-Button Keypad Controller, set the Transmit Components as follows:
Button Link Name Mode Single-Tap Double-Tap Hold Release
E Switch 1/On Custom Button Null Null No Command Null
Null Null No Command Null
F Switch 2/Off Custom Button Null Null No Command Null
Null Null No Command Null
G Switch 3/A Custom Button Null Null No Command Null
Null Null No Command Null
H Switch 4/B Custom Button Null Null No Command Null
Null Null No Command Null
I Switch 5/C Custom Button Null Null No Command Null
Null Null No Command Null
J Switch 6/D Custom Button Null Null No Command Null
Null Null No Command Null
K Switch 7 Custom Button Null Null No Command Null
Null Null No Command Null
L Switch 8 Custom Button Null Null No Command Null
Null Null No Command Null
Transmit Type: Line Packet Transmission Attempts: 2
6-Button Transmit Components 8-Button Transmit Components
Notes:
1. Under Options, set the LED Brightness and Enable Backlighting as desired. The LED Indicator Mode should generally be set to
Multiple LEDs.
2. HAI controllers use the Powerline Interface Module (PIM) in Message Mode. While Message Mode is the factory default mode
of the PCS Serial PIM, the PCS UPStart application uses the Pulse Mode of the PIM. When connected to the HAI Serial Interface
Module, the PIM can manually be put into Message Mode using the Program pushbutton on the PIM as follows: