HAI OmniLT, Руководство пользователя

Страница: 20 / 20

Page 20
For example, if Switches 1-4 responds to Links 1-4, you can create a macro that gets the status of each of the switches when any of the
4 Links are received (i.e. transmitted by a UPB device, such as a 6-Button or 8-Button Keypad Controller). For example:
WHEN GROUP 1:
Unit 1 Status
WHEN GROUP 1:
Unit 2 Status
WHEN GROUP 1:
Unit 3 Status
WHEN GROUP 1:
Unit 4 Status
When the Group 1 button (macro) is executed, OmniLT gets the status of units 1-4.
WHEN LINK 1 ON:
RUN GROUP 1
WHEN LINK 2 ON:
RUN GROUP 1
WHEN LINK 3 ON:
RUN GROUP 1
WHEN LINK 4 ON:
RUN GROUP 1
When Link 1-4 On is received on the UPB network, the Group 1 button (macro) is executed; which updates the status for units 1-4.
Program Link Commands (4=ALL)
OmniLT can transmit Links onto the UPB network (typically to execute or set lighting scenes).
Press the 4 (ALL) key to transmit a UPB Link command.
ALL
0=OFF 1=ON 2=SCN 3=LINK
When 3 (LINK) is selected:
ENTER LINK
1-250
Enter a Link between 1 and 250.
LINK 1
0=OFF 1=ON 2=SET
When this program is activated, the corresponding Link is transmitted onto the UPB network.