HAI OmniLT, Руководство пользователя

Страница: 5 / 20

Page 5
Status of a Unit
Press the # (STA) key to see the status (On or Off) of a RadioRA device.
Entry Lights
STATUS ON
Note: When a RadioRA device transmits a signal (i.e. Switch or Dimmer is turned on or off locally, Mater Control button is pressed,
or Phantom Button is executed), OmniLT will automatically update the status of each affected device.
All On / Off
RadioRA devices are not affected by the OmniLT “All On” or “All Off” command. To achieve this functionality, HAI suggests that
you program the “All On” and “All Off” macro to execute Phantom Button 16 (All On) and Phantom button 17 (All Off).
For example:
WHEN ALL ON: PHANTOM BUTTON 16 ON
WHEN ALL OFF: PHANTOM BUTTON 17 ON
If the “House Code All On” or “House Code All Off” setup item is set to “Yes”, OmniLT will change the status of each unit according
to the setting. If House Code All On is set to “Yes”, OmniLT sets the status of all units on that House Code to “On” (even though it
doesn’t explicitly send an All On command to those units). If the “House Code All On” or “House Code All Off” setup item is set to
“No”, OmniLT will not change the status of each unit on the House Code.
Executing Phantom buttons
OmniLT can turn on and turn off each of the 17 possible Phantom Buttons. Phantom Buttons must be pre-programmed into the RS-
232 interface or Chronos. Phantom Button 16 is always assigned to “All On” (if the Phantom button is turned on or off) and Phantom
Button 17 is always assigned to “All Off” (if the Phantom button is turned on or off).
To issue Phantom Button commands, from the top-level display or from the main menu, press the 4 (ALL) key on the console keypad,
and then press the 4 (PHANTOM) key. You are prompted to enter a Phantom Button (1-17).
ENTER BUTTON:
1-17
Enter the Phantom Button number (1-17) followed be the ' # ' key.
PHANTOM BUTTON 1
0=OFF 1=ON
When a Phantom Button is turned on, all of the devices that are pre-programmed with that Phantom Button will go to their preset light
levels. When a Phantom Button is turned off, all of the devices that are pre-programmed with that Phantom button will turn off.