ESPRIT Gas Extinguishing User Manual
INSTALLATION
17
Approved Document Ref: UI-ESG-01 Issue 2.0
INSTALLATION
Safety
Important notice:
Please read this manual before handling the equipment and observe all advice given within it.
Important Notes:
The product must be installed, commissioned and maintained for operation in accordance with the
instructions and the applicable wiring codes of practice and national standard regulations for fire
systems appropriate to the country and location of the installation.
This equipment is designed to be operated from 230V AC 50/60 Hz mains supplies and is of Class I
construction. As such it must be connected to a protective earthing conductor in the fixed wiring of the
installation. Failure to ensure that all conductive accessible parts of this equipment are adequately
bonded to the protective earth will render the equipment unsafe.
Warnings
Warning Sign:
Before installation refer to the ratings shown on the label inside the
product and to the
‘Specifications Chart’ in this document. If you are unclear on any
point, please DO NOT proceed.
Contact the manufacturer or supplier for
clarification and guidance.
Only trained service personnel should undertake the Installation, Programming
and Maintenance of this equipment.
Cautions
Equipment Guarantee
This product has been manufactured in conformance with the requirements of all
applicable EU Council Directives and is not guaranteed unless the complete system
is installed and commissioned in accordance with the laid down national standards.
This product has been designed to comply with the requirements of the Low Voltage Safety and the
EMC Directives. Failure to follow the installation instructions may compromise its adherence to
these standards.
Waste Electrical and Electronic Equipment Directive
!
www.acornfiresecurity.com
www.acornfiresecurity.com
