Haes ESG-2001, Инструкция по установке, пусконаладке и эксплуатации

Страница: 34 / 88

ESPRIT Gas Extinguishing User Manual OPERATING INSTRUCTIONS
34
Approved Document Ref: UI-ESG-01 Issue 2.0
Engineer Controls (Access Level 3)
The Engineer (Access level 3) controls can be accessed by:
•
From the Authorised User (Access level 2) Main Menu , use Left/Right arrow keys to move
cursor to:
o
CONFIG menu
o
or CONTROL menu > FLOODING icon
•
Press
✓
key to select CONFIG menu, or CONTROL > FLOODING sub-menu. The digital
display will show the following message:
Enter Level 3 Access Code
0 _ _ _
•
Use the keypad to enter code 3333:
o
Press
✓
key
o
Use the Up/Down arrow keys to increase/decrease the number value
o
Use the Left/Right arrow keys to move to the next digit in the 4-digit sequence
o
When all 4 digits have been set to the code 3333 press
✓
key once again. The
Access level 3 menu will become available for operation.
Use the Scroll Control keypad up/down and left/right arrows, and the enter
✓
key to navigate the
Access level 3 menu.
Note: The Access level 3 code 3333 is the factory default. The access code may be changed from the
CONFIG menu PANEL sub-menu.
Available Functions
The functions that can be performed at Access level 3 are:
•
Set the panel to automatically learn what internal cards are fitted within the panel, and what
remote units (connected via the RS-485 Peripheral BUS) and devices (detectors, sounders,
call-points, etc.) are connected to the internal cards.
•
Configure the outputs for the various external devices (detectors, sounders, etc.).
•
Reset panel to factory defaults
•
Reset four-digit passcodes
•
Configure the various options for the release of extinguishant, including; delays on release,
gas zone flooding, extraction of extinguishant.
Engineer Menu Options
The Engineer (Access level 3) menu options, available from the Main Menu , are:
•
CONFIG
•
CONTROL:
o
FLOODING
Engineer Controls (Access Level 4)
The Engineer (Access level 4) controls can be accessed by:
•
From the Authorised User (Access level 2) Main Menu , use Left/Right arrow keys to
move cursor to Report menu icon and press
✓
key to select
•
Under Report Menu select the COUNTER option and then press
✓
key to access it.
www.acornfiresecurity.com
www.acornfiresecurity.com