ESPRIT Gas Extinguishing User Manual
PRODUCT OVERVIEW
7
Approved Document Ref: UI-ESG-01 Issue 2.0
PRODUCT OVERVIEW
General Description of the Equipment
The ESPRiT-G extinguishing gas panel acts as both a conventional fire alarm panel and an automatic
extinguisher control panel and was designed from the ground up to be intuitive and flexible for the
engineer. The panel is easy to install and programme and incorporates a large 240 x 64-pixel graphical
LCD display, with an easy-to-navigate menu system, which contains simple discernible icons in each
section.
In-
built safety features ensure the client’s employee
s and assets are protected to the highest degree
with the minimum risk.
The panels are available in One Flood Zone (three Conventional Detection Circuits), and Two Flood
Zones (six conventional detection circuits), and hence will be presented in two different enclosure sizes.
The Gas panel can be powered by either; 35W, 1.2 Amps (for 1 Flooding Area), or 100W, 3.4 Amps
(for 2 Flooding Areas),
switch mode PSU’s
, rated at 230VAC, 50/60Hz.
The panel also offers optional Output Expansion Relay Board providing additional volt-free relay
outputs.
The panel supports connections for up to Sixteen Remote Status Units (RSU), or up to Sixteen
Economy Remote Status Units (EcoRSU).
This product has been designed and manufactured in the United Kingdom.
www.acornfiresecurity.com
www.acornfiresecurity.com