Hadeco Smartdop 30EX, Руководство по эксплуатации

Страница: 5 / 64

Cautions
Please read the following important points carefully before you operate the unit.
1. Only skilled persons should operate the unit.
2. Use the unit for measuring blood flow.
3. Do not apply any modification to the unit.
4. Device placement
Follow the requirements for storage and operating environments.
(1) Do not place it near water.
(2) Dot not place it where atmospheric pressure, temperature, humidity, ventilation,
sunlight, dust, salt, sulfur and so forth will affect the unit adversely.
(3) Pay attention to the stability conditions to avoid too much inclination, vibration,
shock and so on during transportation and installation of the unit.
(4) Do not place it where chemicals are stored or gas may be generated.
(5) Do not place it where the unit tends to fall.
(6) Do not place it on or adjacent other electronic devices.
5. Before use
(1) Make sure that the unit operates safely and correctly by implementing
performance check mentioned in "§ 6-1. Performance check by User".
(2) Make sure that all cables are connected correctly and safely.
(3) Using it with other equipment together may cause a misdiagnosis or danger to
patient due to a malfunction.
(4) Double-check that all the cables do not obstruct any external connection to the
patient.
(5) Do not sterilize the main unit and non-sterilizable probe to prevent any damage.
6. Operation
(1) Do not use the unit simultaneously with either electric cautery, cardioverter, other
ultrasonic device or mobile phone.
(2) Be careful not to exceed time and volume of diagnosis treatment required.
(3) Always make sure the unit and patient are not under abnormal conditions.
(4) When any abnormality is found on the unit or the patient, take proper action such
as stopping use of the unit in a manner safe for the patient.
(5) In case of emergency or unexpected situations, take the following action(s) to
stop the inflation of the cuff:
• Press INF/DUMP button to dump the pressure.
• Disconnect the tubing from the unit.
• Turn the unit off.
(6) Do not let the patient touch the unit.
(7) Use the designated components only.