Hadeco Smartdop 30EX, Руководство по эксплуатации

Страница: 32 / 64

25
c. MEMORY - CLEAR
(1) Select the memory number, in which you wish to
clear the data. The memory number with "*"
indicates memory area where data have been
already stored.
(2) Press Enter and then the confirmation screen with
waveform stored will be displayed as shown in the
picture right. Press Enter to clear the data, or press
Left to cancel.
Note: If the waveform selected is not the one you wish to
clear, press Up and Down to select other memory #.
(3) To clear all the data at once except FREEZE,
select and press on ALL and follow the instruction.
d. DIR (Flow direction)
Press Right to change waveform polarity as follows:
Forward: Flow toward probe is processed as positive component.
Reverse: Flow away from probe is processed as positive component.
e. DISP / OTHERS - DISP (Waveform / Data)
Press Right to change the Display mode as follows:
WAVE: Displays waveforms.
DATA: Displays numerical data
Note: Changing Display mode can be also done by pressing LEG/TOE.
Forward
mode
Reverse
mode