Hach DR 5000 Скачать руководство пользователя

Страница: 115 / 136

115

Advanced Operations

Insert the different filter in the given order one after the other
with the filter glass facing the front of the instrument. Press

Next

after inserting a filter and closing the cell compartment

After the last measurement the results are displayed.

Press

PC & Printer

icon to send the data to a USB memory

stick, PC or to a printer.

The files will be stored automatically as CSV file (Comma
Separated Value). The file name will be formatted as
“Verification.csv“.

6.8.4 Output checks

If a printer is connected a test printing of the current screen will be
printed.

6.8.5 Lamp history

The Lamp History menu provides the following information:

•

The amount of time that the lamp has been on (Hours)

•

The number of times that the lamp has been turned on (Cycles)

•

The number of times that the instrument tried to turn the UV
lamp on (triggers)

After a lamp is replaced and the Lamp History is reset, the display
of the total operating time is reset to 0.

Press

Lamp History

in the System Checks menu.

Press

Reset VIS

and the Visible Lamp will be reset.

Press

Reset UV

and the UV Lamp will be reset.

Press

to return to System Checks.

Содержание DR 5000








































































































































Результаты поиска

Содержание DR 5000

Отзывы:

Похожие инструкции для DR 5000

Бренды по названию

Популярные бренды

Hach DR 5000, Руководство пользователя

Результаты поиска

Содержание DR 5000

Отзывы:

Похожие инструкции для DR 5000

Бренды по названию

Популярные бренды