Hach Ultra ORBISPHERE 3624, Руководство оператора

Страница: 47 / 102

3624 ProBrix Plus - Instrument Setup 41 of 96
Operator Manual
ORBISPHERE
3.6 Rolling Average (instrument only)
The rolling average feature causes the instrument to average measurements over
successive measurement cycles. It suppresses sharp peaks and troughs, while retaining
reasonably fast response to real concentration changes. This option also acts as a noise
filter for Brix/Diet measurement.
Choose
ROLLING AVERAGE
from the
MODIFY OPTIONS
menu. Select the required
measurement (
CO2
,
BRIX
or
DIET/T.A.
). Then select
DISABLED
if rolling averages are
not required, or select the number of measurements over which the average will be taken
(
3
,
5
,
7
or
9
) for your selection.
3.7 Languages (instrument only)
The instrument can display its menus in English, French, Japanese, Spanish, German,
or Italian although the units of measurement remain the same (i.e. parts per million is still
expressed as
ppm
regardless of language).
Choose
LANGUAGE
from the
MODIFY OPTIONS
menu and select your preference.
3.8 Hold Recovery (instrument only)
This option allows you to choose a longer or shorter recovery time after a
Hold
condition
has ended.
Choose
HOLD RECOVERY
from the
MODIFY OPTIONS
menu. You are given a choice
of
1
,
2
,
3
or
4
cycles before normal measurement resumes, each cycle being
approximately 15 seconds in length. Highlight the desired recovery period, and then
press
ENTER
.
3.9 Offsets
To set an individual
CO2
or
Brix/Diet
offset from the instrument, choose
OFFSET
from
the
MODIFY OPTIONS
menu and select the desired measurement.
Note:
This offset will be lost once a different product is selected.
Set the offset value. Use the up/down arrows to toggle
between the plus and minus signs.