manualshive.com logo in svg

Hach Ultra ORBISPHERE 3624, Руководство оператора

Поделиться
Скачать
Hach Ultra ORBISPHERE 3624 Скачать руководство пользователя страница 12

6 of 96

 Manual Overview - 3624 ProBrix Plus

 Operator Manual

ORBISPHERE

Safety Recommendations

For safe operation, it is imperative that these service instructions be read before use and
that the safety recommendations mentioned herein be scrupulously respected. Opening
the 3624 instrument exposes non-insulated electrical components with hazardous
voltages. Therefore the instrument should not be opened. If repairs or adjustments are
necessary, the instrument should be returned to an authorized Hach Ultra service center.

If danger warnings are not heeded to, serious material or bodily injury could occur.

WARNING

In accordance with safety standards, it must be possible to disconnect the power supply 
of the instrument in its immediate vicinity.

WARNING

The installation of the instrument should be performed exclusively by personnel 
specialized and authorized to work on electrical installations, in accordance with 
relevant local regulations.

Service and Repairs

None of the instrument’s components can be serviced by the user. Only personnel from
Hach Ultra or its approved representative(s) is (are) authorized to attempt repairs to the
system and only components formally approved by the manufacturer should be used.
Any attempt at repairing the instrument in contravention of these principles could cause
damage to the instrument and corporal injury to the person carrying out the repair. It
renders the warranty null and void and could compromise the correct working of the
instrument and the electrical integrity or the CE compliance of the instrument.

If you have any problems with installation, starting, or using the instrument please
contact the company that sold it to you. If this is not possible, or if the results of this
approach are not satisfactory, please contact the manufacturer’s Customer Service.

Содержание ORBISPHERE 3624







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды