H3C UniServer R4900 G3, Руководство пользователя

Страница: 69 / 299

60
Figure 74 Installing the GPU module support bracket
7.
Install the GPU module and connect the GPU module power cord. For more information, see
"
Installing a GPU module with a power cord (standard chassis air baffle) ."
8.
Remove the standard chassis air baffle and the power supply air baffle, and then install the
GPU-dedicated chassis air baffle. For more information, see "
Replacing air baffles ."
9.
Install the riser card on PCIe riser connector 1.
a.
Remove the PCIe riser card blank from PCIe riser connector 1, as shown in Figure 28 .
b.
Align the installation hole on the GPU support bracket with the guide pin on the
GPU-dedicated chassis air baffle, and place the riser card on the system board. Then,
fasten the captive screw to the GPU-dedicated chassis air baffle, as shown in
Figure 75 .
NOTE:
For simplicity, the figure does not show the GPU power cord.
Figure 75 Installing the riser card
10.
Connect cables for the GPU module as needed.
11.
Install the access panel. For more information, see " Replacing the access panel ."
12.
Rack-mount the server. For more information, see " Rack-mounting the server ."