78
Figure 45 Identifying the drive letter of the NVMe drive to be removed
5.
Execute the
ledctl locate=/dev/drive_letter
command to turn on the Fault/UID
LED on the drive. The
drive_letter
argument represents the drive letter, for example,
nvme0n1.
6.
Execute the
echo 1 > /sys/block/drive_letter/device/device/remove
command to unmount the drive from the operating system. The
drive_letter
argument
represents the drive letter, for example, nvme0n1.
7.
Observe the Fault/UID LED on the drive. If the Fault/UID LED turns steady blue, remove the
drive from the server.
For more information about the removal procedure, see "Replacing an NVMe drive."
Performing a managed hot removal from the Intel
®
ASM Web
interface
1.
Stop reading data from or writing data to the NVMe drive to be removed.
2.
Identify the location of the NVMe drive. For more information, see "
."
3.
Run Intel
®
ASM.
4.
Click
RSTe Management
.
Figure 46 Accessing RSTe Management
5.
Expand the
Intel(R) VROC(in pass-thru mode)
menu to view operating NVMe drives, as
shown in
.
