30
{
Access the CLI or GUI of the server.
•
Observe the drive LEDs to verify that the drive is operating correctly. For more information, see
"Drive LEDs."
Installing power supplies
Guidelines
•
The power supplies are hot swappable.
•
Make sure the installed power supplies are the same model. HDM will perform power supply
consistency check and generate an alarm if the power supply models are different.
•
To avoid hardware damage, do not use third-party power supplies.
Procedure
1.
As shown in
, remove the power supply blank from the target power supply slot.
Figure 26 Removing the power supply blank
2.
Align the power supply with the slot, making sure its fan is on the left.
3.
Push the power supply into the slot until it snaps into place.
Figure 27 Installing a power supply
4.
