27
is used by several logical drives, RAID performance might be affected and maintenance
complexities will increase.
•
If the installed drive contains RAID information, you must clear the information before
configuring RAIDs. For more information, see the storage controller user guide for the server.
Procedure
1.
Remove the security bezel, if any. For more information, see "
2.
Press the latch on the drive blank inward with one hand, and pull the drive blank out of the slot,
as shown in
.
Figure 20 Removing the drive blank
3.
Install the drive:
a.
Press the button on the drive panel to release the locking lever.
Figure 21 Releasing the locking lever
b.
Insert the drive into the slot and push it gently until you cannot push it further.
c.
Close the locking lever until it snaps into place.
