47
•
Remove the blade server.
•
When you replace a component, examine the slot and connector for damages. Make sure the
pins are not damaged (bent for example) and do not contain any foreign objects.
•
You might also remove other components. For the removed components to be reinstalled
correctly, record their positions and connections before removal, for example, taking pictures of
cable connection and drive installation positions, or labeling cables.
•
To learn about the specific installation guidelines of the storage controller and its power fail
safeguard module, see "
Storage controller and its power fail safeguard module
Removing the storage controller and its power fail safeguard
module
1.
Remove the chassis cover. Press the chassis cover unlock button, slide toward the rear of the
blade server, and then lift the cover up.
2.
(Optional) Remove the supercapacitor.
a.
Disconnect the cable between the storage controller and the supercapacitor.
b.
Disconnect the fixing buckle of the supercapacitor outward and take out the supercapacitor
from the slot
.
3.
Remove the storage controller. Remove the fixing screws from the storage controller, and then
lift the storage controller up to remove it from the blade server
.
Installing a storage controller and a power fail safeguard
module
1.
Install the storage controller. Align the three screw holes in the storage controller with the three
threaded studs on the system board, insert the storage controller, and use screws to secure the
controller.
2.
Install a supercapacitor to the air baffle, if any, and connect the supercapacitor cable to the
storage controller.
NOTE:
The accessories delivered with the supercapacitor include a supercapacitor fixing base, an uncoded
adapter cable, and an adapter cable with code 0404A0X1. Neither the fixing base nor the uncoded
adapter cable will be used. When installing the supercapacitor, fix the supercapacitor directly to the
air guide hood of the blade server, and use the adapter cable with code 0404A0X1 to connect the
storage controller and the supercapacitor.
a.
Install the supercapacitor onto the air baffle. Tilt the supercapacitor and insert one end of
the supercapacitor into the supercapacitor slot, and press the other end into the slot.
