8
SN
Description
Status
•
Flashing red (1 Hz)
—A critical alarm is present.
3
Embedded GE
network adapter LED
•
Steady green
—A link is present on the port.
•
Flashing green
—The port is receiving or sending data.
•
Off
—No link is present on the port.
4
Power on/standby
button and system
power LED
•
Steady green
—The system has started.
•
Flashing green (1 Hz)
—The system is starting.
•
Steady amber
—The system is standby.
•
Off
—No power is present.
•
When the Health LED shows that the system is faulty, check the system operating state on HDM.
•
Possible reasons:
No power supplies are present.
The installed power supplies are faulty.
The chassis is not powered.
SUV cable
The SUV cable connects to the SUV connector on the front panel of the blade server. The SUV cable
allows for the expansion of two USB 2.0 ports, one serial port and one VGA port for the blade server.
Figure 5 SUV cable
Table 6 SUV cable description
Item
Description
Application
1
Serial port
Diagnoses faults and debugs devices.
2
VGA connector
Connects terminal displays such as monitors or KVM devices
3
2 × USB 2.0 connectors
The extended USB 2.0 connectors and USB 3.0 connector that
comes with the default configuration are all available for the
following USB devices:
•
USB drives
•
USB keyboards or mouses.
