14
Table 11 NVMe drive LED description
Drive fault/UID
LED status
Drive
present/active
LED status
Description
Flashing amber (0.5
Hz)
Off
The managed hot removal is complete, and you are allowed to
remove the drive.
Flashing amber (4
Hz)
Off
The drive is in hot insertion.
Steady amber
Steady/Flashing
(4.0 Hz)
The drive is faulty. Replace the drive immediately.
Steady blue
Steady/Flashing
(4.0 Hz)
The drive is operating correctly and is selected by the RAID
controller.
Off
Flashing (4.0 Hz)
The drive is performing a RAID migration or rebuilding, or the
system is reading or writing data to the drive.
Off
Steady on
The drive is present but no data is being read or written to the
drive.
Off
Off
The drive is not securely installed.
SATA M.2 SSD module
With the SATA M.2 SSD adapter module, the blade server supports up to two SATA M.2 SSD
modules. Use the LEDs on the front panel of the SATA M.2 SSD module to identify its status.
describes the meaning of the LEDs.
Figure 11 SATA M.2 SSD module LEDs
(1): SATA M.2 SSD module fault/UID LED
(2): SATA M.2 SSD module present/active LED
Table 12 SATA M.2 SSD module LED description
Fault/UID LED
status
Present/Active LED
status
Description
Flashing amber (0.5 Hz) Steady/Flashing (4.0 Hz)
An M.2 SSD module failure is predicted. As a best
practice, replace the drive before it fails.
Steady amber
Steady/Flashing (4.0 Hz)
An M.2 SSD module is faulty. Replace the drive
immediately.
Steady blue
Steady/Flashing (4.0 Hz)
An M.2 SSD module is operating correctly and is
