Gyrus Acmi PlasmaKinetic SuperPulse, Руководство пользователя

Страница: 16 / 52

SECTION 4 GENERAL INFORMATION
Gyrus ACMI PlasmaKinetic SuperPulse Generator USER MANUAL
Part Number: 144012-MB
Page 4-2
A long press will give access to the setup menu, giving access to the following functions
below with repeated short presses: -

Display intensity

Key click on/off

Select language

Enter PIN Code
NOTE
If there is no user activity for a short period, the generator will exit the menu
and return to the previous state.
When a PK connector cable is attached, the symbol below appears on the display.
Fig 4.2 Screen for one 3-Way PK cable installed on the selected socket.
Output Displays for PK Instruments
The display is split into two halves; the upper portion of the display is used to indicate the
type of instrument active, that is the instrument that will provide an output when the Cut or
Coag pedal is pressed. The lower half of the display indicates the output waveform type
and power selected.
The left lower portion displays Plasmakinetic

(PK) mode selection PK1, PK2, PK3, and
ThermoKinetic mode selection T1 or T2, with the default power setting from 10 to 200
dependent on the type of Gyrus ACMI PK Instrument attached.
The right portion displays Vapor Pulse Coagulation (VPC) mode selection VP1, VP2, VP3 and
standard desiccate (DES), with the default power setting from 10 to 120 dependent on the type
of Gyrus ACMI PK instrument attached. The VPC mode is only available with Gyrus ACMI PK
instruments.
The appropriate display will flash and an audible alarm will sound when an output is
activated.
Fig 4.3 Screen for Needle or Hook selected
NOTE
The PK output is not available for some PK instruments. The lower left
hand portion of the display remains blank in this case.
3 Way Cable attached
Insert Device
Needle / Hook
PK1 VP1
40 20
SECTION 4
GENERAL
INFORMATION