SCANNER
(OPTIONAL)
73
4.
Close the top cover and tighten the screw from the
bottom.
Configuration
Record
Print out the configuration record list on page75, fill in
the details, and keep it with GDM-8200 series.
Insert scanner
Power Off
Turn the Power Off and take off the power cord.
GDM-8200 Series User Manual
74
Open GDM-8200
series rear panel
slot
Take off the two screws on the slot corners to remove the
optional slot cover. Keep the screws for later reuse.
Insert the
scanner
Insert the scanner (already configured according to the
procedures on page69) to either of the two slots, upper or
lower. Close the cover by tightening the screws.
Power On
Connect the power cord and turn On the power.
