SCANNER
(OPTIONAL)
71
Select Channel group
Background
2 groups, 16 channels each, are available for the scanner.
Group1
CH101 ~ 118
Group2
CH201 ~ 218
Select group
Set the jumper J8 on the rear side of the board
accordingly. Move the jumper to the left for selecting
CH1xx (101 ~ 118), and move to the right for selecting
CH2xx (201 ~ 218).
CH101 - 118
CH201 - 218
GDM-8200 Series User Manual
72
Connect wire
Wire selection
Make sure the wires have at least the same Voltage and
Current capacity as the maximum ratings in the
measurement.
Connection
1.
Turn the screw left (loose) using the screw driver and
insert the wire. Turn the screw right (tight) and
secure the connection.
1 Loosen
2 Insert
3
Tighten
2.
Route the wires as follows, using the two openings
(left and right) at the front cover.
3.
Bundle the wires at the front cover using the holes at
the bottom.
