STORE/RECALL
65
S
TORE/
R
ECALL
For storing and recalling measurement results using the
Scanner, see page68.
Measurement
Result
Store Measurement Record ....................................65
Recall Measurement Record ...................................66
System Setting Recall Factory Installed Setup ................................67
Store Measurement Record
Background
GDM-8200 series can store the measurement history
which can be recalled later for observation and analysis as
in Maximum, Minimum, and Average value.
Data
count
1 ~ 9999
Not applicable to
Store/recall measurement history is not applicable to
Diode/Continuity test
/
.
Store step
1.
Press the Shift key followed by
the DCI (Store) key. The store
menu appears.
2.
Move the cursor using the
Left/Right key. Change the data
count using the Up/Down key.
GDM-8200 Series User Manual
66
3.
Press the Enter key to confirm
editing and to go back to the
previous display.
STO
Indicates the measurement history is stored
Recall Measurement Record
Background
GDM-8200 series can recall the stored measurement
history for observation and analysis as in Maximum,
Minimum, and Average value.
Not applicable to
Store/recall measurement history is not applicable to
Diode/Continuity test
.
Recall stored
record
Press the Shift key, then the ACI
(Recall) key. The stored
measurement record appears.
1st
display
Shows the stored measurement result
2nd
display
Shows the reading count
RCL
Indicates the data has been recalled
View each
reading
Change the reading count using the
Up/Down key.
View Max/Min/
Average
Switch to the Average/Maximum/
Minimum value of the recorded data
using the Right key.
