K-BUS
®
KNX/EIB
Universal Interfaces
21
Control the scene via “8 bit scene”:
Parameter value
Behaviour
On long operation
After a long operation, the object “8 bit scene” sends a
save command on the bus and thereby triggers the storing
of the current scene in the actuators e.g. dimming actuator,
switch actuator.
If object value= ‘1’
If the object “Store scene, X” receives the value “1”, the
object “8 bit scene” sends a save command on the bus and
save the current scene.
On long operation and object value= ‘1’
If the object “Store scene, X” receives the value “1” on
the bus, the next long push button action triggers the
sending of a save command via the object “8 bit scene”, the
current scene will be saved. When the object “store scene,
X” receives the value “0”, end up the saving the value of
current scene.
Provided that a “1” has not been received at the object
“Store scene” since the last save, a long operation is
interpreted in the same way as a short operation.
Parameter “Long operation after”
This parameter is visible when the parameter “Store scene” is “On long operation” or “On long
operation and object value= ‘1’”, it is defines the period here, after which an operation is interpreted as
“long”.Options:
0.3s
0.5s
……
10s
Parameter “Debounce time”
It can set the vibration time to prevent unwanted multiple operation by bouncing of contacts in
vibration time, that means the effective time of the contact operation.Options:
10ms
20ms
……
150ms