K-BUS
®
KNX/EIB
Universal Interfaces
19
Parameter “Connect contact type”
This parameter defines whether the contact at the input is a normally open contact or a normally
closed contact.Options:
Normally closed
Normally open
The parameter introduced in this chapter is use “Normally open” as the example, the normally close
is just opposite.
Parameter “Control the scene by”
It is possible to select whether the scene control is carried out via “5 separate objects” or whether
values that are stored in the actuators are recalled and saved via an “8 bit scene”.Options:
5 separate objects
8 bit scene
If the parameter “5separate objects” is selected, it will activate the control of the groups of the
actuator, these 5 objects’ parameter window will be shown in Fig. 10; If the parameter “8 bit scene” is
selected, it can control the scene such as the scene function in dimming actuator
、
switch actuator, the
parameter window will be shown in Fig. 9.
Parameter “No. of scene [0…63]
This parameter will be visible when the scene control is “8 bit scene”, it can be set the No. of scene.
The No. range is 0~63.
Parameter “Reaction on short operation”
This parameter defines whether a short operation of the input causes a light scene to be recalled or
no reaction takes place.Options:
No reaction
Recall scene
Parameter “Store scene”
This parameter defines how the saving of the current scene.Options:
No
On long operation
With object value= ‘1’
On long operation and object value= ‘1’
Different type of scene control makes the saving of the current scene different. The following table
provides an overview: