©
Guldmann
GB
-1394/11/08
4
3.
I
n
st
al
la
tI
o
n
Ceiling installation, bracket assembly
Ceiling types:
All types
Bracket types:
Extended bracket, free length .
Std . extended bracket
The bracket is mainly used in rooms with a high ceiling to
bring the rail system down to a normal height of fitting and
use .
• Mark the position where the bracket is to be fitted and
at the same time measure the length of the extended
bracket .
The measurement is performed using laser equipment .
The laser is set to the height where the rail is to be fitted
(upper edge of rail) . Then measure down at each fixing
point from the ceiling to the upper edge of the rail .
• Now size the threaded rods and the pipes to the correct
length for each fixing point . Remember to allow for the
space required by the upper and lower ceiling brackets .
• The extended bracket is then assembled prior to
installation . The top and bottom ceiling brackets
are tightened against pipes to create a firm bracket .
Remember the guide bushing around the ceiling
bracket .
• Now the extended bracket is ready to be fitted .
All brackets are fitted before the rail is installed .
• The fitting of extended brackets in the ceiling is carried
out according to the procedure described under GH
ceiling brackets . For further information, refer to the
individual type of ceiling .
• The rail is fitted to the extended bracket in the same
way as described under GH ceiling brackets .
• When using a standard extended ceiling bracket the
procedure is the same, i .e . the brackets are assembled
prior to fitting and then fitted to the ceiling as one
bracket .
• After mounting the system it may be necessary to
stabilise it by fitting GH stabilising brackets as side or
inclining support .
• Fit a brackets around the pipe that hangs down, and
then measure towards the wall or ceiling .
• Cut the pipe to the right lenght, and fit it to the
”u-brackets” at the extended bracket and at the
wall/ceiling .
• Fasten the fittings to the wall or ceiling depending on
the wall/ceiling’s texture; see the respective types .
Fitting of brackets
Содержание GH2
