Guldmann GH2, Руководство по установке

Страница: 48 / 109

©
Guldmann
GB
-1394/11/08
0
3.
I
n
st
al
la
tI
o
n
wall fitting
Wall types: Lightweight walls
Bracket types: GH side-hung/end-hung bracket
GH plasterboard bracket
• Examine the make-up of the wall .
• GH plasterboard brackets can be used on plaster-
boards and other forms of lightweight walls . However,
a minimum wall thickness of 24 mm
(1 ") is required .
• Mark the spots where the fittings are to be fitted .
Use laser equipment to determine height placement
so that the wall brackets are positioned horizontally .
• Drill four holes for the plasterboard bracket . Use the
plasterboard bracket as a template for drilling .
• GH plasterboard bracket is fitted directly on the wall
and fastened using e .g . four Fischer 5 x 65 S screws .
• Then place the GH wall bracket on the two threaded
rods and fasten with 10 mm (
3
/
8
") locking nuts .
• The clamp is led through the oval hole at the top of the
wall bracket and is fitted using a facet disc and locking
nut against the wall bracket .
• When the rails have been fitted to the brackets, tighten
the locking nut securely .
• Finish by fitting plastic covers onto bolts and nuts .
• Notice that the bracket may just be used for systems
with max . 200 kg lifting capasity!
Fitting of brackets