GUK FA21/4 Cartonac 2000-2, Руководство по эксплуатации

Страница: 6 / 204

Chapter Subject Page
3.12 Holding-down guides 3-39
3.13 Troubleshooting 3-40
4. Cleaning, Maintenance 4.1 Safety information 4-1
4.2 Cleaning / cleaning agents 4-1
4.3 Maintenance overview 4-3
4.4 Changing the drive belt 4-5
4.5 Dismantle the feed table 4-7
4.6 Changing a folding roller 4-9
4.6 Changing the grooving shafts 4-10
4.7 Changing the belt shafts 4-10
5. Wearing Parts Lists — Table of contents 5-1
5.1 Ordering Information 5-2
5.2 Important notes for following lists 5-2
5.3 Toothed belts, drive belts for machines without 5-5
change over gear
5.4 Toothed belts, drive belts for machines with 5-9
change over gear
5.5 Folding pockets 5-15
5.6 Suction roller, crankshaft 5-17
5.7 Handwheel shafts (5 versions) 5-19
5.8 Friction unit 5-39
5.9 Intermediate shaft 5-41
5.10 Assembly for combination folding rollers 5-44
5.11 Assembly for grooving shafts/belt shafts 5-46
5.12 Folding rollers for 4 - and 6- pocket machines 5-49
5.13 Grooving and belt shafts 5-57
5.14 Grooving shaft tools 5-61
5.15 WOM belt transfer 5-63
6. Spare Parts Lists — Table of contents 6-1
6.1 Ordering Information 6-2
6.2 Important notes for following lists 6-2
6.3 Table plates (sheet length 320 mm, 450 mm or 600 mm) 6-5
6.4 Machine side left and right 6-11
6.5 Delivery side: FA21 with mechanical or electrical 6-13
valve control
6.6 Control shafts, Overload clutches 6-15
6.7 Paper ejection device 6-27
6.8 Folding pockets 6-29
ANNEX — Pneumatic plan
— Final inspection check list
Betriebsanleitung / Operating Instructions
Table of Contents
iv © by GUK TD-FA21C2000-2-000-12•1008