Guilin Woodpecker Medical Instrument Endo Radar Plus, Инструкция по эксплуатации

Страница: 37 / 45

35
b) Product storage must be batched and marked and recorded.
7.4.10 Transportation
1. Prevent excessive shock and vibration during transportation, and
handle with care;
2. It should not be mixed with dangerous goods during transportation.
3. Avoid exposure to sun or rain or snow during transportation.
8 Storage, transport and maintenance
8.1 Storage
8.1.1 This equipment should be stored in a room where the relative
humidity is 10% ~ 93%, atmospheric pressure is 70kPa to106kPa, and
the temperature is -20°C ~ +55°C.
8.1.2 Avoid the storage in a too hot condition. High temperature will
shorten the life of electronic components, damage battery, reshape or
melt some plastic.
8.1.3 Avoid the storage in a too cold condition. Otherwise, when the
temperature of the equipment increases to a normal level, there will be
dew that will possibly damage PCB board.
8.2 Transport
8.2.1 Excessive impact and shake should be prevented in
transportation. Lay it carefully and lightly and don’t invert it.
8.2.2 Don’t put it together with dangerous goods during
transportation.
8.2.3 Avoid solarization and getting wet in rain and snow during
transportation.
8.3 Maintenance
8.3.1 This device do not include accessories for repair usage, the
repair should be carried out by authorized person or authorized after
service center.
8.3.2 Keep the equipment in a dry storage condition.
8.3.3 Do not throw, beat or shock the equipment.
8.3.4 Do not smear the equipment with pigments.
8.3.5 In order to ensure the normal operation of the equipment, it
is recommended to maintain the equipment once every two months,
including checking whether the equipment is started up and charging
the battery. Calibration is recommended when using a new/other contra-
angle or after an extend period of operation(At least once a month), as