GUDEL CP 3-5 V2, Руководство по эксплуатации

Страница: 58 / 350

7.4.3 Unpacking
Accessories and small parts are packaged in a separate case or directly with
the product itself.
The components have been treated with anti-rust oil (spray) and wrapped in
oiled paper. Remove packaging carefully.
The anti-rust oil protects the components. We recommend not removing
the oil.
Dispose of the packaging in accordance with the local waste regulations.
Checking the deliv-
ery
Check the content of the delivery by comparing it with the accompanying
documents. Check the product for damage. Report transport damage
promptly.
7.4.4 Setup process
This chapter describes the set-up procedure. Carefully read the procedure in-
structions. Then carry out the individual steps according to the detailed de-
scription.
Set up the product as follows:
1 Position the base plates if necessary
Ü 2
61
2 Anchor the base plates if necessary
Ü 2
62
3 Set up the uprights
Ü 2
63
4 Level uprights
Ü 2
65
5 Secure uprights against falling over
Ü
Chapter 7.4.4.6,
2
67
6 Install the beam
Ü 2
67
7 Connect the beams
Ü 2
69
8 Straighten beams
Ü 2
70
The product has been set up.
Commissioning OPERATING MANUAL CP 3-5 V2
9007202252815371_v1.0_
EN-US
58